:Author: 1rguimaraes :Email: :Date: 06/02/2025 :Revision: version# :License: Public Domain

= Project: {Project}

Describe your project

== Step 1: Installation Please describe the steps to install this project.

For example:

1. Open this file
2. Edit as you like
3. Release to the World!

== Step 2: Assemble the circuit

Assemble the circuit following the diagram layout.png attached to the sketch

== Step 3: Load the code

Upload the code contained in this sketch on to your board

=== Folder structure

.... sketch123 => Arduino sketch folder ├── sketch123.ino => main Arduino file ├── schematics.png => (optional) an image of the required schematics ├── layout.png => (optional) an image of the layout └── ReadMe.adoc => this file ....

=== License This project is released under a {License} License.

=== Contributing To contribute to this project please contact:

=== BOM Add the bill of the materials you need for this project.

|=== | ID | Part name | Part number | Quantity | R1 | 10k Resistor | 1234-abcd | 10
| L1 | Red LED | 2345-asdf | 5
| A1 | Arduino Zero | ABX00066 | 1
|===

=== Help This document is written in the AsciiDoc format, a markup language to describe documents. If you need help you can search the http://www.methods.co.nz/asciidoc[AsciiDoc homepage] or consult the http://powerman.name/doc/asciidoc[AsciiDoc cheatsheet]